mo.mix si20 FG
Äußeres Gleit- und Formtrennmittel – Masterbatch
External lubricant and mold release agent – masterbatch
Artikelnummer: | 6303 FG |
Anwendung: | Mold Release Agent / Lubricant to improve tribological properties |
Hauptwirkstoff: | Polydimethylsiloxan |
Träger: | Polyethylene / Ethylene Acrylate Copolymer |
Item no.: | 6303 FG |
Application: | Mold Release Agent / Lubricant to improve tribological properties |
Main active ingredient: | Polydimethylsiloxane |
Carrier: | Polyethylene / Ethylene Acrylate Copolymer |
Konzentration:
20,0 %
Verarbeitungstemperatur:
100 °C – 300 °C
Gleitmittelwirkung:
-100 °C – 200 °C
Lieferform:
Granules
Concentration:
20,0 %
Processing temperature:
100 °C – 300 °C
Lubricant effect:
-100 °C – 200 °C
Delivery form:
Granules
Ethylene - Copolymer, PA, PE, POM, PP, PPO, TPE
ABS, PS
white
Ethylene - Copolymer, PA, PE, POM, PP, PPO, TPE
ABS, PS
white
mo.mix si20 FG
Äußeres Gleit- und Formtrennmittel – Masterbatch
Eigenschaft | typische Werte |
Wirkstoffgehalt | 20,0 % |
Schmelztemperatur Träger | 100 °C |
Temperaturbereich der Gleitmittelwirkung | -100 °C – 200 °C |
Verarbeitungstemperatur | 100 °C – 300 °C |
Schüttgewicht | 450 g/l |
- verbessert die tribologischen Eigenschaften der Teile durch Reduktion des Reibungskoeffizienten
- geringer Energieverbrauch
- gute Verschleißfestigkeit
- verlängerte Wartungsintervalle
- Wirkmechanismus beruht auf Unverträglichkeit des Wirkstoffes zu Polymeren und der Migrationsfähigkeit des Wirkstoffes
- Verträglichkeit der Trägerkomponenten zu allen thermoplastischen Massenkunststoffen
- Verbesserung der Fließfähigkeit hochviskoser Kunststoffschmelzen
- als Formtrennmittel wirksam
- bewirkt glatte und klebefreie Profil- und Teileoberflächen
- einfache und sichere Dosierbarkeit
- mechanisch bewegte / beanspruchte Systeme
- durch Gleitreibung beanspruchte Teileoberflächen zur Reduktion von Reibung und Verschleiß
lange lagerfähig in geschlossenen Gebinden unter 50 °C
als Gleitmittel für Extrusion 1,0 % - 2,0 %
als Formtrennmittel 1,0 % - 3,0 %
PE-Bag à 25 kg netto, 750 kg/Palette
Stand: 001/0324
Unsere technischen Daten stützen sich auf sorgfältige Untersuchungen und stellen unseren aktuellen Erkenntnisstand dar. Dennoch sollen sie nur unverbindlich beraten.
Our technical information is based on careful examinations and is believed to be reliable, but is presented without guarantee.
kcd Kunststoffe, Additive und Beratung GmbH, D-99427 Weimar, Otto-Schott-Str. 5
Tel.: +49 (0) 3643 404837
Fax: +49 (0) 3643 404838
e-mail: info@kcd-additive.com
web: www.kcd-additive.com
mo.mix si20 FG
External lubricant and mold release agent – masterbatch
Characteristic | Typical values |
Active agent content | 20,0 % |
Melting temperature of carrier | 100 °C |
Temperature range of the lubricant effect | -100 °C – 200 °C |
Processing temperature | 100 °C – 300 °C |
Bulk weight | 450 g/l |
- improves the tribological properties of parts by reducing the coefficient of friction
- low energy consumption
- good wear resistance
- extended maintenance intervals
- Mechanism of action is based on the incompatibility of the active ingredient with polymers and the migration ability of the active ingredient
- Compatibility of the carrier components with all thermoplastic mass-produced plastics
- improving the flowability of highly viscous plastic melts
- effective as a mold release agent
- creates smooth and sticky-free profile and part surfaces
- easy and safe dosing
- mechanically moved/stressed systems
- Part surfaces subjected to sliding friction to reduce friction and wear
Can be stored for a long time in closed containers below 50 °C
as lubricant for extrusion 1.0 % - 2.0 %
as mold release agent 1.0 % - 3.0 %
PE bag of 25 kg net, 750 kg/pallet
Status: 001/0324
Unsere technischen Daten stützen sich auf sorgfältige Untersuchungen und stellen unseren aktuellen Erkenntnisstand dar. Dennoch sollen sie nur unverbindlich beraten.
Our technical information is based on careful examinations and is believed to be reliable, but is presented without guarantee.
kcd Kunststoffe, Additive und Beratung GmbH, D-99427 Weimar, Otto-Schott-Str. 5
Tel.: +49 (0) 3643 404837
Fax: +49 (0) 3643 404838
e-mail: info@kcd-additive.com
web: www.kcd-additive.com
Verwandte Produkte
Art.-Nr. | Name | Konzentration | Verarbeitungstemp. | Gleitmittelwirkung |
6201 FG | mo.mix ptfe 60 FG | 60,0 % | 100 °C – 300 °C | -100 bis 200 °C |
6301 | mo.mix mos2-75 | 75,0 % | 100 °C – 300 °C | -100 bis 200 °C |
6303 | mo.mix si20 | 20,0 % | 100 °C – 300 °C | -100 bis 200 °C |
6405 | stearate.mix a01 | 70,0 % | 100 °C – 250 °C | bis 100 °C |
Related products
Item no. | Name | Concentration | Processing temperature | Lubricant effect |
6201 FG | mo.mix ptfe 60 FG | 60,0 % | 100 °C – 300 °C | -100 bis 200 °C |
6301 | mo.mix mos2-75 | 75,0 % | 100 °C – 300 °C | -100 bis 200 °C |
6303 | mo.mix si20 | 20,0 % | 100 °C – 300 °C | -100 bis 200 °C |
6405 | stearate.mix a01 | 70,0 % | 100 °C – 250 °C | bis 100 °C |